Lightweight 2x10 shifting precision for your XC & Marathon bike.

The SRAM XX High Clamp Front Derailleur is designed for 2x10-speed MTB drivetrains and perfectly complements high-quality XX and 10-speed double crankset setups. With its close-to-frame clamp, it ensures a stiff, torsion-resistant linkage for fast, clean shifts between the two chainrings – even under load on climbs.

The High-Clamp design with a 31.8 mm clamp makes the front derailleur compatible with many common MTB frames. The Top-Pull cable routing guides the shift cable from above to the front derailleur, making it ideal for frames with top cable routing – often found on cross-country and marathon bikes.

In combination with a 10-speed Powerchain and a 2-speed crankset, the XX front derailleur provides a precise, defined shifting feel and reliable chain guidance – the right choice if you want to run a lightweight, sporty 2x10 setup or complete an existing XX drivetrain.

Highlights:

• For 2x10 MTB drivetrains: optimized for lightweight, sporty double chainring setups in cross-country and marathon use.
• High-Clamp mounting: clamp sits higher on the seat tube and ensures stiff, direct actuation.
• Top-Pull cable routing: shift cable comes from above – suitable for many classic and modern MTB frames.
• XX Performance: crisp, clean gear changes between small and large chainrings with a 10-speed Powerchain.

Technical Data:

• Model: SRAM XX Front Derailleur High Clamp
• Model ID: FD-XX-HC-A1
• Application: MTB, Cross Country, Marathon, Trail (2x10 setup)
• Gear stages: 2x10-speed
• Mounting type: High Clamp (clamp mounting on seat tube)
• Cable routing: Top Pull (cable routing from above)
• Clamp size: 31.8 mm
• Drive compatibility: SRAM 10 Speed Powerchain, 2x MTB
• Color: black / silver (model-dependent, subtle race design)

Scope of delivery:

• 1 x SRAM XX Front Derailleur High Clamp | Top Pull | 2x10-speed | 31.8 mm clamp

Manufacturer Part No.: 00.7615.064.060 | EAN: 710845622250

The SRAM XX High Clamp Top Pull Front Derailleur is ideal if you want to build a lightweight, precise 2x10 MTB setup with classic top cable routing or complete an existing XX system.