Precise 2x10 performance for compact XX drivetrains.

The SRAM XX Low Direct Mount front derailleur is designed for performance-oriented 2x10-speed MTB setups and specifically matched to compact chainring combinations with 42/28 teeth. It ideally complements lightweight cross-country and marathon bikes when you want a wide gear range combined with crisp shifting.

With its Direct-Low mounting, the front derailleur attaches directly to the corresponding Direct Mount interface on your frame. This provides a very stiff, frame-close connection, a clean appearance, and precise chain guidance. The Top Pull cable routing is designed for frames with cable routing from above and enables a clean, short cable path from the shifter to the front derailleur.

Designed for SRAM 10 Speed Powerchain 2x MTB drivetrains, the XX front derailleur offers fast, defined gear changes between the small and large chainrings - even under load on steep climbs. The approved chainstay angle of 66–69° suits many modern XC and trail frames with the corresponding Direct Mount standard.

Highlights:

• 2x10 high-end front shifting: optimized for XX double cranksets with 42/28 teeth.
• Low Direct Mount: direct, frame-close mounting for maximum stiffness and precise shifting performance.
• Top Pull cable routing: ideal for frames with upper cable routing and a clean cockpit.
• For modern geometries: designed for chainstay angles of 66–69° on many XC and trail bikes.

Technical specifications:

• Model: SRAM XX front derailleur | Low Direct Mount | Top Pull
• Application: MTB, cross-country, marathon, trail (2x setup)
• Speeds: 2x10-speed
• Compatible chainrings: 42/28 teeth
• Mounting type: Direct-Low (Low Direct Mount on the frame, without a clamp)
• Cable routing: Top Pull (shift cable from above)
• Chainstay angle: 66–69°
• Drivetrain compatibility: SRAM 10 Speed Powerchain, 2x MTB
• Shifting actuation: mechanical shift cable
• Color: black / silver (model-dependent XX Race design)

Scope of delivery:

• 1 x SRAM XX front derailleur | Low Direct Mount | Top Pull | 2x10-speed | for 42/28 teeth

Manufacturer's part no.: 00.7615.065.120 | EAN: 710845628726

The SRAM XX Low Direct Mount Top Pull front derailleur is the right choice if you want to run a lightweight, precise 2x10 MTB setup with 42/28 chainrings and a Direct Mount interface on your frame.