Light, direct, and race-ready: the SRAM XX front derailleur for 2x10 MTB setups.

The SRAM XX Low Clamp Top Pull front derailleur is designed for sporty 2x10-speed MTB drivetrains and perfectly complements lightweight cross-country and marathon bikes. With its low clamp position, the front derailleur sits close to the frame on the seat tube, provides a stiff linkage, and enables precise, fast shifting between the small and large chainrings.

With the Top Pull cable routing, the shift cable is routed to the front derailleur from above - ideal for frames with top cable routing. In combination with a SRAM 10 Speed Powerchain and a double crankset, it provides reliable chain guidance and defined shifting, even under load on steep climbs or when accelerating out of a corner.

Thanks to the 31.8 mm and 34.9 mm clamp sizes, the XX front derailleur can be mounted on a wide range of MTB frames. If you want to build a lightweight 2x10 race setup or complete an existing XX drivetrain, this low-clamp front derailleur is the right front-shifting solution.

Highlights:

• 2x10 high-end front shifting: optimized for lightweight XC and marathon setups with a double crankset.
• Low Clamp design: low clamp position for greater tire clearance and a frame-close, stiff installation.
• Top Pull cable routing: ideal for frames with top cable routing and a clean cockpit.
• Wide compatibility: suitable for seat tubes with 31.8 mm and 34.9 mm diameters.

Technical specifications:

• Model: SRAM XX Low Clamp Top Pull front derailleur
• Intended use: MTB, cross-country, marathon, trail (2x setup)
• Speeds: 2x10-speed
• Drivetrain compatibility: SRAM 10 Speed Powerchain, 2x MTB
• Mounting type: Clamp-Low (low clamp mounting on the seat tube)
• Cable routing: Top Pull (shift cable from above)
• Clamp sizes: 31.8 mm and 34.9 mm
• Shifting actuation: mechanical shift cable
• Color: black / silver (XX race design, depending on version)

Scope of delivery:

• 1 x SRAM XX front derailleur | Low Clamp | Top Pull | 31.8 / 34.9 mm clamp | 2x10-speed

Manufacturer's part no.: 00.7615.064.000 | EAN: 710845622205

The SRAM XX Low Clamp Top Pull front derailleur is ideal if you want to ride a lightweight, precise 2x10 MTB setup with classic top cable routing and a frame-close clamp mount.